Getting minor dents and scratches on a car is a common occurrence, and while some owners may choose to overlook them, even a small imperfection can significantly detract from the car’s appearance.
The good news is that these issues don’t always require professional intervention. There are simple methods you can try at home to fix dents and scratches on your car.
How to Fix Dents and Scratches on Cars
There are various ways to tackle dent and scratch repair. Surprisingly, some everyday household items like candle wax or super glue can come in handy! Here are five effective DIY techniques:
Remove a Shallow Scratch with Sandpaper
This method is suitable for shallow scratches that don’t extend beyond the clear coat of the paint. To determine this, run your fingertip over the scratch. If your fingernail doesn’t catch, you can proceed.
First, clean the affected area thoroughly. Then, using 2000-grit wet sandpaper, gently rub the scratch. Take breaks during the process and periodically sprinkle water onto the surface.
Continue sanding until the scratch becomes nearly invisible. Once done, apply a rubbing compound to polish the area.
Candle Wax as a Temporary Solution
For light surface scratches, candle wax can serve as a quick, temporary fix, especially in emergency situations when you have no other options.
Clean the scratched area, then gently rub candle wax over it. This will help cover and seal the scratch, although it is important to remember that this is not a long-term solution.
Similarly, super glue can be used for minor scratches. It blends well with the surrounding surface, making the damaged area less noticeable.
Use a Plunger for a Large Dent
A plunger can be a lifesaver for larger dents that do not have creases or holes. You can use a standard bathroom plunger or invest in a car-specific dent plunger for this task.
Place the plunger’s head over the dent and pull to pop it out. You may need to repeat this process several times until the dent is leveled with the rest of the surface.
Fix from the Back with a Hammer or Mallet
If you have access to the backside of the dent, you can use a hammer or mallet to gently push the dent out. For larger dents, a mallet is preferable, while a hammer is better suited for smaller ones.
Tap the dent lightly, checking frequently to avoid overcorrecting or deforming the surface.
Resort to a Dent Puller for Significant Damage
For larger or more severe dents, a dent puller may be the most effective solution. This tool can be purchased at a local hardware store, but it requires some experience to use safely.
Begin by drilling a small hole in the center of the dent. Insert the puller wire into the hole and carefully pull the dent outward until it aligns with the surrounding surface.
Once the dent is removed, fill the hole with a suitable filler, then sand and repaint the area to restore its original appearance.