ZF is preparing to introduce its hybrid brake-by-wire system in a North American vehicle program by late 2028 after receiving a 2026 Automotive News PACE Award. The technology combines electromechanical brakes on the rear axle with conventional hydraulic brakes at the front, allowing braking commands to be transmitted electronically.
The design gives automakers a practical route toward software-defined vehicle platforms without requiring an immediate transition to fully electric braking at every wheel.
ZF has not identified its launch partner or the vehicle that will use the system, but the planned production program represents an important step in its braking technology development.
ZF’s Hybrid Brake-by-Wire Wins a 2026 PACE Award
ZF announced on November 18 that its hybrid brake-by-wire system had received a 2026 Automotive News PACE Award, recognizing innovation among automotive suppliers.
The award is significant because the technology is moving beyond development toward a planned production program with an unnamed North American automaker. ZF says production is scheduled to begin by late 2028, although it has not disclosed the manufacturer’s identity, vehicle name, or expected production volume.
The PACE recognition also went to a second ZF technology. Its Steer-by-Wire system received an award at the same ceremony. Unlike conventional steering, which uses a mechanical connection between the steering wheel and front wheels, Steer-by-Wire transmits steering commands electronically.
ZF says that the system is already in production in North America, China, and Europe. The two awards highlight the supplier’s wider work on electronically controlled chassis technologies.
Hybrid brake-by-wire is designed as a transitional architecture. Rather than replacing every hydraulic brake with an electric actuator at once, it combines an electromechanical brake, or EMB, on the rear axle with conventional hydraulic brakes at the front.
The arrangement gives manufacturers access to electronic braking control while retaining familiar hydraulic components where they may be advantageous for cost, packaging, or vehicle requirements.
The system uses ZF’s Integrated Brake Control (IBC) to coordinate braking functions. The driver’s brake request is detected and transmitted electronically to the control system, which manages the braking response.
At the rear, electric motors apply the brakes without relying on hydraulic pressure at the wheels. At the front, conventional hydraulic calipers continue to generate braking force.
ZF describes this configuration as a flexible way for manufacturers to adopt brake-by-wire technology. It is particularly relevant to the North American market, where pickup trucks and larger light vehicles are important product categories.
The company says the hybrid layout is suitable for passenger cars and light commercial vehicles, including vehicles with different powertrain types.
The PACE Award does not mean the system is already fitted to a retail vehicle. It recognizes the supplier’s innovation, while the late-2028 production target remains a future program milestone. ZF has not announced the model, brand, or exact launch date.
How the Hybrid System Changes the Way a Vehicle Brakes
In a conventional hydraulic braking system, pressing the brake pedal creates hydraulic pressure that travels through brake lines to calipers at the wheels. The calipers squeeze brake pads against rotating discs, slowing the vehicle.

Modern systems add electronic controls for anti-lock braking, stability management, and driver-assistance functions, but hydraulic pressure remains central to applying the brakes.
Brake-by-wire changes how the driver’s request reaches the braking hardware. Sensors detect pedal input and send an electronic signal to control units. Those units calculate the required braking response and command the relevant actuators.
The system therefore relies on sensors, software, electronic control, and mechanisms that apply force at the wheels.
ZF’s hybrid arrangement uses this electronic approach for the rear axle, where electromechanical brake actuators replace conventional hydraulic calipers. The front axle retains hydraulic brakes.
ZF says the rear EMB can serve as both a service brake and a parking brake, while the integrated electro-hydraulic control system manages the braking architecture.
One stated benefit is that the configuration eliminates the need for a conventional vacuum brake booster. This matters because modern vehicles, particularly electric vehicles, do not always have an engine that can provide a steady vacuum source.
A brake system that does not depend on engine vacuum can be applied across combustion, hybrid, and battery-electric vehicles.
The hybrid layout also gives automakers a route to introduce electronic control without immediately adopting a fully dry system. In a fully electromechanical design, electric motors at the wheels generate braking force, and hydraulic fluid is no longer needed for normal braking.
ZF’s hybrid design retains front hydraulic hardware, reducing the scale of the change compared with converting all four wheels.
Electronic control can also help integrate braking with regenerative energy recovery in electrified vehicles. During deceleration, an electric motor can act as a generator and return some kinetic energy to the battery.
The friction brakes provide additional stopping force when required. The precise balance depends on the vehicle’s control strategy, battery condition, and driving situation. Brake-by-wire provides an architecture through which these functions can be coordinated.
ZF also points to packaging and software integration as advantages. By reducing reliance on some conventional mechanical and hydraulic components, manufacturers may gain more freedom when arranging vehicle systems.
Electronic braking can also be integrated with other chassis controls and driver-assistance functions, although the final capabilities depend on the automaker’s vehicle design and software validation.
Braking is a safety-critical function, so electronic transmission does not remove the need for robust safeguards. ZF’s wider brake-by-wire portfolio uses integrated control and redundant fallback strategies.
The company says its IBC can provide redundant fallback options, but the exact safety architecture and operating behavior of the North American production application have not been publicly detailed.
Why the Technology Matters for North American Vehicles
ZF’s choice of a hybrid architecture is relevant to a market where pickups, SUVs, and light commercial vehicles make up a substantial part of new-vehicle demand. These vehicles have different mass, towing, and packaging requirements from smaller passenger cars.
Automakers may prefer an incremental transition to electronic braking rather than redesigning the entire system around four electromechanical actuators at once.
The configuration is also designed to work across multiple powertrain types. A vehicle does not need to be fully electric to use brake-by-wire technology.
Gasoline-powered vehicles, hybrids, and battery-electric models can all benefit from electronic chassis control, provided the system is engineered for the vehicle’s weight, performance, and safety requirements.
For electric vehicles, the ability to coordinate friction braking with regenerative braking is particularly relevant. Regenerative systems can recover energy during deceleration, but they cannot always provide all the stopping force required.
Battery charge limits, low temperatures, and emergency braking can change how much regeneration is available. A friction-brake system remains necessary, and electronic control can help manage the transition between regenerative and conventional braking.
The system may also support the wider shift toward software-defined vehicles. Automakers increasingly want functions such as braking, steering, and suspension to communicate through electronic architectures.
This can make it easier to coordinate driver-assistance features and introduce software updates, but it also increases the importance of cybersecurity, system validation, and dependable electronic components.
ZF is positioning braking and steering as connected parts of this transition. Its steering-by-wire technology removes the fixed mechanical connection between the steering wheel and steering gear, replacing it with electronic signals and actuators.
The company says this technology is already in production across several regions. Winning a second PACE Award alongside Hybrid Brake-by-Wire gives ZF recognition for both sides of vehicle motion control.
However, production readiness for one system should not be confused with the status of the other. ZF’s Steer-by-Wire is already being manufactured, while the North American Hybrid Brake-by-Wire program is scheduled to enter production by late 2028. The supplier has not disclosed whether the two technologies will appear together in the same vehicle.
Cost will be another factor. Electromechanical actuators, sensors, and electronic control units add components that must be manufactured, tested, and integrated.
ZF argues that its modular system gives automakers flexibility, but it has not published a price comparison against conventional braking systems or quantified the expected savings for the unnamed customer.

The next milestones will be the identification of the North American automaker, confirmation of the first vehicle application, and details of the production system’s final specifications. Until then, the award is evidence of industry recognition, not proof of performance in a production vehicle.
ZF’s Hybrid Brake-by-Wire system represents a measured step toward electronically controlled braking. By combining rear electromechanical brakes with front hydraulic brakes, it offers automakers a way to adopt new control technology while retaining part of the established braking architecture.
If the planned late-2028 launch proceeds, the system could become an important example of how traditional vehicle hardware is being adapted for software-defined platforms.
